836 watts ? efficiency efficiency level v (24 w level iv) ? cec2008 & eisa 2007 compliant ? it & medical approvals ? interchangeable input connectors ? output voltages from 5 v to 24 v available ? class ii construction ? low cost vep series input input voltage ? 8 & 15w: 80-264 vac 24 w: 80-264 vac, derate output power 25% <90 vac 36 w: 90-264 vac input frequency ? 47-63 hz input current ? 8 w: 0.3 a max at 90 vac 15 w: 0.5 a max at 90 vac 24 w: 0.6 a max at 90 vac 36 w: 0.9 a max at 90 vac inrush current ? 70 a max at 230 vac, cold start at 25 c power factor ? en61000-3-2, class a no load input power ? <0.3 w output output voltage ? see tables initial set accuracy ? 5% at 50% load minimum load ? no minimum load required start up delay ? 2 s typical start up rise time ? 8 & 15 w: 100 ms typical, 24 & 36 w: 50 ms typical hold up time ? 5 ms typical at full load and 115 vac line regulation ? 0.5% max load regulation ? 5% max transient response ? 4% max. deviation, recovery to <1% within 500 s for a 50% step load change at 0.2 a/s ripple & noise ? see tables overvoltage protection ? see tables overload protection ? 120-280% short circuit protection ? trip and restart (hiccup mode) temperature ? 0.2 %/?c coefficient general efficiency ? see tables energy efficiency ? level v level iv (24 w versions) isolation ? 8 - 24 w: 4000 vac input to output, 36 w: 3000 vac input to output switching frequency ? 8 & 15 w: 132 khz typical, 24 & 36 w: 65 khz typical mtbf ? 8 - 24 w: 250 khrs, 36 w: 200 khrs to mil-hdbk-217f at 25c, gb environmental operating temperature ? 0 ?c to +40 ?c cooling ? natural convection operating humidity ? 5-95% rh, non-condensing storage temperature ? -20 ?c to +60 ?c shock ? able to survive 1 m drop onto concrete on each of 6 axes vibration ? 10-300 hz, 1 g 15 mins/sweep. 30 mins for each of 3 axes emc & safety emissions ? en55022, class b conducted & radiated harmonic currents ? en61000-3-2, class a voltage flicker ? en61000-3-3 esd immunity ? en61000-4-2, 4 kv contact, 8 kv air, perf criteria a radiated immunity ? en61000-4-3, 3 v/m, perf criteria a eft/burst ? en61000-4-4, level 2, perf criteria a surge ? en61000-4-5, installation class 3, perf criteria a conducted immunity ? en61000-4-6, 3 v, perf criteria a magnetic field ? en61000-4-8, 1 a/m, perf criteria a dips & interruptions ? en61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, perf criteria a, b, b safety approvals ? 8 & 15 w: en60950-1, cul60950-1, iec60950-1, en60601-1, cul60601-1, iec60601-1; 24 w: en60950-1, ccsaus60950-1, iec60950-1, csa60950-01-03, ccsaus60601-1, ul60601-1, iec60601-1, csa c22.2 no601.1, 36 w: iec60950-1, en60950-1, ul60950-1 xppower.com acdc specification free datasheet http://www.datasheetlist.com/
vep08/15 acdc notes 1. measured at end of dc output lead using 20 mhz bandwidth and 0.1 f ceramic capacitor in parallel with 10 f electrolytic capacitor placed at connector terminals. 2. vep08 models: other voltages between 3.0 v and 18.0 v are available on request, consult sales for details. vep15 models: other voltages between 3.0 v and 24.0 v are available on request, consult sales for details. 3. a suffix denoting the type of mains plug required must be added to the part number. see below. 4. efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%. 5. vep08 models: typical trip point, vep15 models: maximum trip point. mechanical details notes 1. all dimensions in inches (mm). tolerance is 0.04 (1) maximum, except output cable length. 2. weight: vep08 - 0.18 lbs (80 g) approx., vep15 - 0.26 lbs (120 g) approx. 3. case material is pc class 94 v-0 4. output lead: ul2468 18-24 awg 5. mains plugs can be ordered separately. part numbers are: vep plug uk, vep plug eu, vep plug cn ^ , vep plug us or vep plug au^ vep08: 1.06 (26.8) vep15: 1.20 (30.5) vep08: 1.67 (42.4) vep15: 1.81 (46.0) vep08: 2.83 (72.0) vep15: 2.95 (75.0) uk add suffix -uk eu add suffix -eu china add suffix -cn usa add suffix -us australia add suffix -au 70.87 10% (1800 10%) output plug: ? 5.5 x ? 2.5 x 11.0 mm inner positive models and ratings p0/u0/ rt2hy p0/u0/ ctp/dlh 2& p0/u0/ a0yyhs/ snuuph otn.h 1& p1hy1tp/dlh wynu 5& diinfnhsf4 4& ntghp o0rehy 3& 8.0 w 5.0 v 1.60 a 150 mv 10.0 v 74% vep08us05 8.0 w 9.0 v 0.88 a 200 mv 18.0 v 77% vep08us09 8.0 w 12.0 v 0.66 a 200 mv 20.0 v 77% vep08us12 8.0 w 15.0 v 0.53 a 200 mv 25.0 v 78% vep08us15 10.0 w 5.0 v 2.00 a 50 mv 9.0 v 75% vep15us05 12.6 w 9.0 v 1.40 a 100 mv 15.0 v 80% vep15us09 15.0 w 12.0 v 1.25 a 100 mv 20.0 v 82% vep15us12 15.0 w 15.0 v 0.90 a 150 mv 25.0 v 84% vep15us15 15.0 w 24.0 v 0.63 a 200 mv 35.0 v 83% vep15us24 free datasheet http://www.datasheetlist.com/
vep24 models and ratings acdc output power output voltage (3) output current ripple & noise (1) overvoltage trip (5) efficiency (4) model number (2) 12.5 w 5.0 v 2.5 a 100 mv 10.0 v 73% vep24us05 19.8 w 9.0 v 2.2 a 100 mv 18.0 v 77% VEP24US09 24.0 w 12.0 v 2.0 a 100 mv 20.0 v 78% vep24us12 24.0 w 15.0 v 1.6 a 100 mv 25.0 v 78% vep24us15 24.0 w 24.0 v 1.0 a 100 mv 35.0 v 78% vep24us24 notes 1. measured at end of dc output lead using 20 mhz bandwidth and 0.1 f ceramic capacitor in parallel with 10 f electrolytic capacitor placed at connector terminals. 2. a suffix denoting the type of mains plug required must be added to the part number. see below. 3. other voltages between 3.0 v and 24.0 v are available on request, consult sales for details. 4. efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%. 5. typical trip point. mechanical details notes 1. all dimensions in inches (mm). tolerance is 0.04 (1) maximum, except output cable length 2. weight: 0.35 lbs (160 g) approx 3. case material is pc class 94 v-0 4. output lead: ul2468 18-24 awg 5. mains plugs can be ordered separately. part numbers are: vep plug uk, vep plug eu, vep plug cn, vep plug us or vep plug au 1.14 (29.0) 1.89 (47.9) 3.46 (88.0) uk add suffix -uk eu add suffix -eu china add suffix -cn usa add suffix -us australia add suffix -au 59.0 10% (1500 10%) output plug: ? 5.5 x ? 2.5 x 11.0 mm inner positive free datasheet http://www.datasheetlist.com/
acdc 14-feb-12 vep36 models and ratings output power output voltage (3) output current ripple & noise (1) overvoltage trip (4) efficiency (3) model number (2) 27 w 9.0 v 3.0 a 200 mv 25.0 v 82% vep36us09 36 w 12.0 v 3.0 a 200 mv 28.0 v 84% vep36us12 36 w 15.0 v 2.4 a 200 mv 28.0 v 84% vep36us15 36 w 24.0 v 1.5 a 200 mv 42.0 v 84% vep36us24 notes 1. measured at end of dc output lead using 20 mhz bandwidth and 0.1 f ceramic capacitor in parallel with 10 f electrolytic capacitor placed at connector terminals. 2. a suffix denoting the type of mains plug required must be added to the part number. see below. 3. efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%. 4. typical trip point. mechanical details notes 1. all dimensions in inches (mm). tolerance is 0.04 (1) maximum, except output cable length 2. weight: 0.57 lbs (260 g) approx 3. case material is pc class 94 v-0 4. output lead: ul2468 18-24 awg 5. mains plugs can be ordered separately. part numbers are: vep plug uk, vep plug eu, vep plug cn, vep plug us or vep plug au uk add suffix -uk eu add suffix -eu china add suffix -cn usa add suffix -us australia add suffix -au 1.420.04 (36.01) 4.020.04 (102.01) 3.900.04 (99.01) 2.090.04 (53.01) 0.310.04 (8.01) 35.43-39.37 (900-1000) output plug: ? 5.5 x ? 2.5 x 11.0 mm inner positive free datasheet http://www.datasheetlist.com/
|
